Skip to the main content

Ask A Question

Need an answer but don’t know who to talk to? Drop your questions in the form field. We’ll pass it along to our in-house experts, and an answer will be emailed to you shortly.

* Required
* Required

Custom Platter & Plate Covers Sizing and Imprinting

Plate Cover
Vollrath Pro Staff -

The Vollrath stainless steel plate covers maintain serving temperatures while protecting food from contamination, ensuring delicious, high-quality meals that are still appetizingly warm at the time of delivery. Made of durable stainless steel, these plate covers are hide signs of wear, are impressively easy to clean and efficiently elevate the quality of your meal delivery service.

  • Satin-finished stainless steel for longer live
  • Custom fit for stability during transport
  • Tapered side wals to ensure stackability when in storage
  • Finer hold for easy removal
  • Extended heights available on request

Odering Instructions: 

Minimum order quantity is 24

Oval Plate Covers

1. Measure width and length of plate.

2. Check the PLC range where both dimensions fall, and select the proper part number and note this on your purchase order. NOTE: if plate falls into two PLC ranges, select the higher PLC part number. 

REFERENCE PLATTER
WIDTH: IN (CM)
PLATTER
LENGTHL IN (CM)
COVER
HEIGHT: IN (CM)
CASE
LOT
PLC-15 8.25 to 11.25 (20.9 to 28.5) 9.38 to 12.38 (23.8 to 31.4) 2 (5.08) 12
PLC-16 9.63 to 12.38 (24.4 to 31.4) 10.63 to 13.38 (26.9 to 33.9) 2 (5.08) 12
PLC-17 10.88 to 13.38 (27.6 to 34.0) 12.13 to 15.63 (30.8 to 39.7) 2.75 (6.99) 12

 

Round Plate Covers

1. Measure five plates at their widest point. Choose the largest one. 

2. Select the part number based on plate diameter.

REFERENCE PLATTER DIAMETER:
 IN (CM)
COVER HEIGHT:
IN (CM)
CASE
LOT
PLC-08 7.69 to 9.0 (19.5 to 22.86) 2.31 (5.9) 12
PLC-09 9.0 to 10.0 (22.9 to 25.4) 2.31 (5.9) 12
PLC-10 10.06 to 11 (25.6 to 27.9) 2.31 (5.9) 12
PLC-11 11.06 to 12 (28.1 to 30.5) 2.81 (7.1) 12
PLC-12 12.06 to 12.75 (30.6 to 32.4) 2.81 (7.1) 12

 

3. Send the largest platter/plate sample with your purchase order to The Vollrath Company, LLC, Attn: Technical Service, 1236 N. 18th St., Door #1, Sheboygan, WI 53082-0611. Samples are recommended for all custom orders. 

4. After we receive the sample and purchase order, we will acknowledge the order with a new part number. 

5. We will confirm model numbers and pricing. Vollrath will guarantee pricing only on orders that have been submitted with sample plates. Order fulfillment is not guaranteed.

6. Custom covers will be slightly larger in diameter than sample plate provided to compensate for normal variations. We cannot guarantee our platter covers will stack solidly if platters are warped. 

7. Lead time: 3-weeks after receipt of purchase order. 

8. Mirror finish: Add "-M" to part number (e.g., PCL-15-M). Additional charge applies. 

NOTE: Custom Plate Covers cannot be canceled or returned. Custom product orders are completed with over/under shipments not to exceed plus or minus 10% of the original order quantity.